0
RESEARCH PAPERS

Elastoplastic Contact of Bodies With Friction Under Normal and Tangential Loading

[+] Author and Article Information
H. S. Nagaraj

Fluid Mechanics Department, General Motors Research Laboratories, Warren, Mich. 48090

J. Tribol 106(4), 519-526 (Oct 01, 1984) (8 pages) doi:10.1115/1.3260974 History: Received February 01, 1983; Online October 29, 2009

Abstract

During the relative motion of surfaces, which are in partial contact, asperities on them interact with one another. A pair of contacting asperities has been modeled as a rigid body contacting an elasto plastic half-space under combined normal and tangential loading. A displacement formulation of the finite element method was used to solve for stresses and displacements. An elastic-plastic type of material behavior with linear strain-hardening was assumed. Results have been obtained for normal approach only, and for normal approach with tangential displacement. At sufficiently high loads, a significant portion of the material under the contact area is in the plastic regime. However, the elastic region lying beneath the plastified area appears to have a major influence on the peak contact pressure and the tangential compliance of contacting bodies. Small relative tangential displacements were found to have only a slight influence on the pressure distribution, but their influence on the extent of the plastified area was found to be significant. These findings may be important for the analytical modeling of surface interactions.

Copyright © 1984 by ASME
Your Session has timed out. Please sign back in to continue.

References

Figures

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In