0
RESEARCH PAPERS

The Tribological Behavior of an Automotive Cam and Flat Lifter System

[+] Author and Article Information
S. Bair, J. A. Griffioen, W. O. Winer

School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Ga. 30332

J. Tribol 108(3), 478-486 (Jul 01, 1986) (9 pages) doi:10.1115/1.3261246 History: Received May 08, 1985; Online October 29, 2009

Abstract

In order to thoroughly characterize the cam/tappet contact, a simulator was designed and constructed which presents a lifter which is stationary except for rotation. The cam instead moves through the lift curve so that the contact remains essentially in the horizontal plane. Three components of contact force on the lifter are measured. A series of eight nominally flat lifter foot materials were investigated for frictional loss as a function of speed. In addition, the effects of oil temperature, running in, lifter rotation and lifter foot spherical radius was studied. With one of the lifters (Al2 O3 ) the surface temperature of the cam was measured at peak lift employing an infrared scanning system. Peak temperatures in excess of 300° C were observed for some operating conditions. Preliminary measurements were made with a roller lifter. The loss per revolution ranged from 1.75 J to 3.9 J for the flat followers. The roller follower loss was 18 percent of that of the flat follower for similar conditions.

Copyright © 1986 by ASME
Your Session has timed out. Please sign back in to continue.

References

Figures

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In