0
RESEARCH PAPERS

The Effects of Indent Residual Stresses on Mixed Mode Cyclic Crack Growth Driving Forces for Bearing Inner Rings

[+] Author and Article Information
V. Bhargava, C. A. Rubin, G. T. Hahn

Center for Materials Tribology, Vanderbilt University, Nashville, TN 37235

J. Tribol 109(4), 634-639 (Oct 01, 1987) (6 pages) doi:10.1115/1.3261524 History: Received January 15, 1987; Online October 29, 2009

Abstract

The residual stresses produced by plastic dents in a solid cylinder have been evaluated for overload, peak-contact-pressure-to-shear-strength ratios of p oi /k = 3.5, and p oi /k = 4. The effects of 2 sets of indent residual stresses on the cyclic crack growth driving forces generated by rolling contact at relative peak pressures of p or /k = 0.5, 1.0 and 2.0, have been evaluated for 3 conditions. These are: (1) the slowly revolving ring, (2) the rapidly revolving ring with associated press fit and centrifugal stresses, and (3) the rapidly revolving ring with the superimposed circumferential compressive stresses arising from a carburized surface layer. The values of ΔK I ΔK II , and the combined mode, ΔK e , are calculated for 18 different rolling conditions, for small cracks with 8 different inclinations, 5 crack-face friction coefficients, and 21 locations in the dent region. The results show that the ΔK-values for a 2a=20μm long crack can exceed the Mode I threshold when the rim rotates slowly. Larger ΔK-values are obtained in the presence of press-fit and centrifugal stresses. However, the residual stresses of the carburized surface layer more than compensate for the press-fit and centrifugal stresses, reducing the ΔK-values below the levels obtained for the slowly rotating rim.

Copyright © 1987 by ASME
Your Session has timed out. Please sign back in to continue.

References

Figures

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In