Pole Tip Recession Measurements on Thin Film Heads Using Optical Profilometry With Phase Correction and Atomic Force Microscopy

[+] Author and Article Information
Martin Smallen, Jerry J. K. Lee

Conner Peripherals, San Jose, Calif. 95134-2128

J. Tribol 115(3), 382-386 (Jul 01, 1993) (5 pages) doi:10.1115/1.2921647 History: Received March 26, 1992; Revised October 01, 1992; Online June 05, 2008


Pole tip recession in magnetic recording thin film heads contributes to spacing loss, which leads to a degradation in the readback signal. As manufacturers improve the performance of magnetic recording devices, this recession will become more significant to the performance of future products. Pole tip recession can be measured by several techniques, including stylus profilometry, optical profilometry, and atomic force microscopy. Stylus profilometry is generally not used since it has several problems in this application. In this study, good correlation was found between optical profilometry and atomic force microscopy measurements, provided that the optical measurements were corrected for phase shift. This is necessary because of the dissimilar materials in the thin film head. There are several methods for making this correction. One method is an analytical correction using known optical constants for the head materials. These constants should be well characterized as the measurements are quite sensitive to them. Overcoating the head with a thin film provides two other methods for getting around the material differences problem. However, these methods require an optimum film thickness. The film must be thick enough so that it behaves as a substrate, but not so thick that it fails to replicate the head. PACS numbers: 85.70.Kh, 06.90. + v, 42.72. + h, 78.65.Pi

Copyright © 1993 by The American Society of Mechanical Engineers
Your Session has timed out. Please sign back in to continue.





Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In