0
RESEARCH PAPERS

The Effect of Surface Irregularities on the Tribological Behavior of Steel Rollers Under Rolling-Sliding Contact

[+] Author and Article Information
Jeng Hour Horng, Jen Fin Lin, Ke Yang Lee

Department of Mechanical Engineering, National Cheng Kung University, Tainan, Taiwan, 70101

J. Tribol 116(2), 209-218 (Apr 01, 1994) (10 pages) doi:10.1115/1.2927198 History: Received November 24, 1992; Revised August 20, 1993; Online June 05, 2008

Abstract

Experiments were conducted utilizing a gear-cam adapter to simulate line-contact lubrication and wear. Roller specimens with various asperity heights and roughness patterns were riding on the roller plates and sliding over the two lands of the lower specimen. The experimental results reveal that the roughness pattern and the asperity height are of importance in determining the friction coefficient, whereas asperity height is more related to the wear rate. The temperature rise of the lubricant seems to be seldom affected by the foregoing factors, but is governed by the combined effect of applied load and driver’s rotational speed. Surface roughness with a transversely oriented pattern, irrespective of the asperity height, normally generates a smaller friction coefficient and a relatively larger wear rate compared to the other two roughness patterns. Rollers having a smooth surface (0.2 μm) do not always lead to the smallest friction, but usually produce the minimum wear rate. The operating conditions, including the increase in applied load, and the reduction of the driver’s rotational speed, along with the increase of asperity height, form the controlling factors of increasing wear rate.

Copyright © 1994 by The American Society of Mechanical Engineers
Your Session has timed out. Please sign back in to continue.

References

Figures

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In