A Theory for the Effects of Film Thickness and Normal Load in the Friction of Thin Films

[+] Author and Article Information
E. F. Finkin

Colt Industries, Fairbanks Morse Inc., Beloit, Wisc.

J. of Lubrication Tech 91(3), 551-555 (Jul 01, 1969) (5 pages) doi:10.1115/1.3554985 History: Received July 25, 1968; Online August 23, 2011


The effect of film thickness in solid friction is reviewed. Two regimes are distinguished: (a) increasing coefficient of friction with decreasing film thickness which occurs for ultrathin films and (b) decreasing coefficient of friction with decreasing film thickness which occurs for thin films. The former regime has previously been treated by the author; consequently, attention is focused on the latter regime. A review of the thin film phenomenon establishes that it is very much dependent on the type of deformation occurring at the contact and concludes that no single expression can uniquely describe it for all materials situations. A special theory is put forth for the contact situation corresponding to a model of an elastic layer of much less rigidity than its substrate and indenter. This situation corresponds to practically all naturally occurring and bonded nonmetallic solid lubricant films of industrial and scientific interest. It is shown that coefficient of friction f obeys the relation f ∝ 1/P for variable load P and constant thickness h, f ∝ h for constant load and variable film thickness, and f ∝ h/P for the general case. These expressions are verified by use of data from pin-on-disk tests, Falex tests, 4-ball tests, modified MacMillan tests, and other types of tests. The experimental data are for naturally formed graphite on diamond, SiO2 bonded PbO on stainless steel, and phenolic bonded 9MoS2 -1 graphite films on steel and aluminum.

Copyright © 1969 by ASME
Your Session has timed out. Please sign back in to continue.






Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In