Frictional and Thermal Behaviors of Sliding-Rolling Concentrated Contacts

[+] Author and Article Information
P. M. Ku, H. E. Staph, H. J. Carper

Southwest Research Institute, San Antonio, Texas

J. of Lubrication Tech 100(1), 121-128 (Jan 01, 1978) (8 pages) doi:10.1115/1.3453101 History: Received March 07, 1977; Revised May 31, 1977; Online October 20, 2010


Sliding-rolling disk scuffing tests were conducted over a wide range of sliding and sum velocities, using a straight mineral oil and three aviation gas turbine synthetic oils in combination with two carburized steels and a nitrided steel. Geometrically-similar disks of two different sizes were tested in two different disk testers of nearly similar designs. In addition to disk size and metallurgy, the surface treatment, surface texture, and surface roughness of the disks were also varied. The investigation further covered variations in the oil supply configuration and flow rate. It is shown that the disk friction coefficient is dependent not only on the oil-metal combination, but also on the disk surface treatment and topography as well as the operating conditions. The quasi-steady disk surface temperature and the mean conjunction-inlet oil temperature are shown to be strongly influenced by the frictional power loss at the contact, but not by the specific makeup of the frictional power loss. They are also influenced by the heat transfer from the disks, mainly by convection to the oil and conduction through the shafts, which are dependent on system design and oil flow rate.

Copyright © 1978 by ASME
Your Session has timed out. Please sign back in to continue.






Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In