0
RESEARCH PAPERS

Filtration Effects on Ball Bearing Life and Condition in a Contaminated Lubricant

[+] Author and Article Information
S. H. Loewenthal

National Aeronautics and Space Administration, Lewis Research Center, Cleveland, Ohio 44135

D. W. Moyer

Tribon Bearing Co., Cleveland, Ohio 44142

J. of Lubrication Tech 101(2), 171-176 (Apr 01, 1979) (6 pages) doi:10.1115/1.3453307 History: Received March 06, 1978; Revised June 12, 1978; Online October 20, 2010

Abstract

Ball bearings were fatigue tested with a noncontaminated MIL-L-23699 lubricant and with a contaminated MIL-L-23699 lubricant under four levels of filtration. The test filters had absolute particle removal ratings of 3, 30, 49, and 105 microns. Aircraft turbine engine contaminants were injected into the filter’s supply line at a constant rate of 125 milligrams per bearing hour. Bearing life and running track condition generally improved with finer filtration. The experimental lives of 3- and 30-micron filter bearings were statistically equivalent, approaching those obtained with the noncontaminated lubricant bearings. Compared to these bearings, the lives of the 49-micron bearings were statistically lower. The 105-micron bearings experienced gross wear. The degree of surface distress, weight loss, and probable failure mode were dependent on filtration level, with finer filtration being clearly beneficial.

Copyright © 1979 by ASME
Your Session has timed out. Please sign back in to continue.

References

Figures

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In