Dent Initiated Spall Formation in EHL Rolling/Sliding Contact

[+] Author and Article Information
Gang Xu

Tecumseh Products Company, Research Laboratory, Ann Arbor, MI 48108

Farshid Sadeghi

School of Mechanical Engineering, Purdue University, West Lafayette, IN 47906

Michael R. Hoeprich

The Timken Company, Canton, OH 44706

J. Tribol 120(3), 453-462 (Jul 01, 1998) (10 pages) doi:10.1115/1.2834570 History: Received July 26, 1996; Revised July 24, 1997; Online January 30, 2008


Dents in elasto-hydrodynamic lubricated (EHL) contacts will initiate spalls and shorten the fatigue life significantly. Experimental results are provided from a ball-on-rod rolling contact fatigue tester with the rod predented with a single large dent. The results indicate that the spall usually initiated at the trailing edge of the dent on the driving surface. These cracks and spalls can also be created in the absence of lubricant. Based on the accumulated plastic strain and damage mechanics concept, a line contact spall initiation model was developed to investigate the dent effects on spall initiation and propagation. The near surface volume of the contact solid was divided into many small metal cells and for each cell the damage law was applied to determine whether the cell is undergoing damage or not. If the cell on the surface is damaged, then it is removed from the surface and a spall will be formed. If the damaged cell occurs below the surface, then a subsurface void is generated, this void could grow to the surface depending on the running conditions. The spall will further modify the surface geometry and initiate a new spall, hence, the spall will propagate. The results indicate that the location of spall initiation depends on the EHL and dent condition. Spalls can initiate at either the leading or trailing edge of the dent depending on the surface traction.

Copyright © 1998 by The American Society of Mechanical Engineers
Your Session has timed out. Please sign back in to continue.





Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In