0
TECHNICAL PAPERS

A Model of Asperity Interactions in Elastic-Plastic Contact of Rough Surfaces

[+] Author and Article Information
Yongwu Zhao, L. Chang

Department of Mechanical Engineering, The Pennsylvania State University, University Park, PA 16802

J. Tribol 123(4), 857-864 (Nov 03, 2000) (8 pages) doi:10.1115/1.1338482 History: Received January 18, 2000; Revised November 03, 2000
Copyright © 2001 by ASME
Your Session has timed out. Please sign back in to continue.

References

Greenwood,  J. A., and Williamson,  J. B. P., 1966, “Contact of Nominally Flat Surfaces,” Proc. R. Soc. London, Ser. A, A295, pp. 300–319.
Greenwood,  J. A., and Tripp,  J. H., 1967, “The Elastic Contact of Rough Spheres,” ASME J. Appl. Mech., 34, pp. 153–159.
Whitehouse,  D. J., and Archard,  J. F., 1970, “The Properties of Ranom Surfaces of Significance in Their Contact,” Proc. R. Soc. London, Ser. A, 316, pp. 97–121.
Hisakado,  T., 1974, “Effects of Surface Roughness on Contact between Solid Surfaces,” Wear, 28, pp. 217–234.
Bush,  A. W., Gibson,  R. D., and Thomas,  T. R., 1975, “The Elastic Contact of a Rough Surface,” Wear, 35, pp. 87–111.
Bush,  A. W., Gibson,  R. D., and Keogh,  G. P., 1979, “Strong Anisotropic Rough Surface,” ASME J. Tribol., 101, pp. 15–20.
Chang,  W. R., Etsion,  I., and Bogy,  D. B., 1987, “An Elastic-Plastic Model for the Contact of Rough Surfaces,” ASME J. Tribol., 101, pp. 257–263.
Horng, Jeng Haur, “An Elliptic Elastic-Plastic Asperity Microcontact Model for Rough Surfaces,” ASME J. Tribol., 120 , pp. 82–88.
Yongwu Zhao,  D., Maietta,  M., and Chang,  L., 2000, “An Asperity Micro-Contact Model Incorporating the Transion from Elastic Deformation to Fully Plastic Flow,” ASME J. Tribol., 107, pp. 86–93.
Johnson,  K. L., Greenwood,  J. A., and Higginson,  J. G., 1985, “The Contact of Elastic Regular Wavy Surfaces,” Int. J. Mech. Sci., 27, No. 6, pp. 383–396.
Vergne,  Ph., Villechaise,  B., and Berthe,  D., 1985, “Elastic Behavior of Multiple Contacts: Asperity Interaction,” ASME J. Tribol., 107, pp. 224–228.
Berthe,  D., and Vergne,  Ph., 1987, “An Elastic Approach to Rough Contact with Asperity Interactions,” Wear, 117, pp. 211–222.
Lai,  W. T., and Cheng,  H. S., 1985, “Computer Simulation of Elastic Rough Contacts,” ASLE Trans., 28, No. 2, pp. 172–180.
Ju,  Yongqing, and Linqing,  Zheng, 1992, “A Full Numerical Solution for the Elastic Contact of Three-Dimensional Real Rough Surfaces,” Wear, 157, pp. 151–161.
Yongsheng,  Leng , 1996, “The Characteristics of Elastically Contacting Ideal Rough Surfaces,” ASME J. Tribol., 118, pp. 90–97.
Goryacheva,  I. G., and Dobychin,  M. N., 1991, “Multiple Contact Model in the problems of Tribomechanics,” Tribol. Int., 24, No. 1, pp. 29–35.
Lee,  S. C., and Cheng,  H. S., 1992, “On the Relation of Load to Average Gap in the Contact between Surface with Longitudinal Roughness,” STLE Tribol. Trans., 35, No. 3, pp. 523–529.
Lee, Si. C., and Ning, Ren, “Behavior of Elastic-Plastic Rough Surface Contacts as Affected by Surface Topography, Load, and Material Hardness,” J. Vibr. Acoust., 39 , No. 1, pp. 67–74.
Komvopoulos,  K., and Choi,  D.-H., 1992, “Elastic Finite Element Analysis of Multi-Asperity Contacts,” ASME J. Tribol., 114, pp. 823–831.
Kucharski,  S., Klimszak,  A., Polijaniuk,  A., and Kaczmarek,  J., 1994, “Finite-Element Model for the Contact of Rough Surfaces,” Wear, 177, pp. 1–13.
Love,  A. E. H., 1929, “Stress Produced in a Semi-Infinite Solid by Pressure on Part of the Boundary,” Philos. Trans. R. Soc. London, Ser. A, A228, p. 337.
Hendricks,  C. P., and Visscher,  M., 1995, “Accurate Real Area of Contact Measurements on Polyurethane,” ASME J. Tribol., 117, pp. 607–611.
McCool,  J. I., 1986, “Predicting Microfracture in Ceramics Via a Microcontact Model,” ASME J. Tribol., 108, pp. 380–386.
Nuri,  K. A., and Halling,  J., 1975, “The Normal Approach Between Rough Flat Surfaces in Contact,” Wear, 32, pp. 81–93.

Figures

Grahic Jump Location
Contact of a rough surface with a rigid smooth flat
Grahic Jump Location
The territory of an asperity
Grahic Jump Location
Mean separation of the surfaces as a function of contact load and plasticity index (a) ψ=0.7, (b) ψ=1.5, and (c) ψ=2.5
Grahic Jump Location
Real area of contact of the surfaces as a function of contact load and plasticity index (a) ψ=0.7, (b) ψ=1.5, and (c) ψ=2.5
Grahic Jump Location
Micro-contact load redistribution induced by asperity interactions for elastic surfaces (a) Wt/AnE=10−5, (b) Wt/AnE=10−4, and (c) Wt/AnE=10−3
Grahic Jump Location
Micro-contact load redistribution induced by asperity interactions for elastic-plastic surfaces (a) Wt/AnE=10−5, (b) Wt/AnE=10−4, and (c) Wt/AnE=10−3

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In