0
TECHNICAL PAPERS

Static Friction Modeling in the Presence of Soft Thin Metallic Films

[+] Author and Article Information
Zhiqiang Liu, Anne Neville, R. L. Reuben

Department of Mechanical and Chemical Engineering, Heriot-Watt University, Edinburgh, EH14 4AS, UK

J. Tribol 124(1), 27-35 (Jan 31, 2001) (9 pages) doi:10.1115/1.1395628 History: Received July 13, 2000; Revised January 31, 2001
Copyright © 2002 by ASME
Your Session has timed out. Please sign back in to continue.

References

Bowden, F. P., and Tabor, D., 1954, The Friction and Lubrication of Solids, Oxford University Press, Oxford.
Dayson,  C., 1971, “The Friction of Very Thin Solid Film Lubrication on Surface of Finite Roughness,” ASLE Trans., 14, pp. 105–115.
Finkin,  E. F., 1973, “The Friction Lead in Spherical Contact,” ASME J. Lubr. Technol., 7, pp. 328–332.
Halling,  J., 1979, “Surface Coatings,” Tribol. Int., 10, pp. 203–208.
El-Sherbiny,  M., and Salem,  F. B., 1979, “Initial Wear Rates of Solid Metallic Films,” Wear, 54, pp. 391–400.
Finkin,  E. F., 1969, “A Theory for the Effects of Film Thickness and Normal Load in the Friction of Thin Films,” ASME J. Lubr. Technol., 91, pp. 551–556.
Kato,  S., Yamaguchi,  K., Marui,  E., and Tachi,  K., 1982, “Friction Properties of a Surface Covered with a Soft Metal Film: Part 2—Analysis of Friction between a Single Protuberance and a Surface,” ASME J. Lubr. Technol., 104, pp. 39–45.
Ogilvy,  J. A., 1993, “Predicting the Friction and Durability of MoS2 Coatings Using a Numerical Contact Model,” Wear, 160, pp. 171–180.
El Shafei,  T. E. S., Arnell,  R. D., and Halling,  J., 1983, “An Experimental Study on the Hertzian Contact of Surfaces Covered by Soft Metal Films,” ASLE Trans., 26, pp. 481–486.
El-Sherbiny,  M., and Halling,  J., 1977, “Friction and Wear of Ion-Plated Soft Metallic Films,” Wear, 45, pp. 211–220.
El-Sherbiny,  M., and Salem,  F. B., 1986, “Tribological Properties of PVD Silver Films,” STLE Tribol. Trans., 29, pp. 223–228.
Greenwood,  J. A., and Williamson,  J. B. P., 1966, “Contact of Nominally Flat Surfaces,” Proc. R. Soc., London, Ser. A, 295, pp. 300–319.
Chang,  W. R., Etsion,  I., and Body,  D. B., 1987, “An Elastic-Plastic Model for the Contact of Rough Surfaces,” ASME J. Tribol., 109, pp. 257–263.
Chang,  W. R., 1997, “An Elastic-Plastic Contact Model for a Rough Surface With an Ion-Plated Soft Metallic Coating,” Wear, 212, pp. 229–237.
Zhang,  X., and Kato,  K., 1996, “Friction Model of Thin Solid Film Lubrication,” ASME J. Tribol., 118, pp. 693–697.
Tabor,  D., 1981, “Friction-The Present State of Our Understanding,” ASME J. Lubr. Technol., 103, pp. 169–179.
Muller,  V. M., Derjaguin,  B. V., and Toporov,  Y. P., 1983, “On Two Methods of Calculation of the Force of Sticking of an Elastic Sphere to a Rigid Plane,” Colloids Surf., 7, pp. 251–259.
Chang,  W. R., Etsion,  E., and Bogy,  D. B., 1988, “Static Friction Coefficient Model for Metallic Rough Surfaces,” ASME J. Tribol., 110, pp. 57–63.
Polycarpou,  A. A., and Etsion,  I., 1998, “Static Friction of Contacting Real Surfaces in the Presence of Sub-boundary Lubrication,” ASME J. Tribol., 120, pp. 296–303.
Johnson,  K. L., Kendall,  K., and Roerts,  A. D., 1971, “Surface Energy and the Contact of Elastic Solids,” Proc. R. Soc., London, Ser. A, 324, pp. 301–313.
Derjaguin,  B. V., Muller,  V. M., and Toporov,  Y. P., 1975, “Effect of Contact Deformations on the Adhesion of Particles,” J. Colloid Interface Sci., 53, pp. 314–326.
Muller,  V. M., Yushchenko,  V. S., and Derjaguin,  B. V., 1980, “On the Influence of Molecular Forces on the Deformation of an Elastic Sphere and Its Sticking to a Rigid Plane,” J. Colloid Interface Sci., 77, pp. 91–101.
Pashley,  M. D., 1984, “Further Consideration of the DMT Model for Elastic Contact,” Colloids Surf., 12, pp. 69–77.
Stanley,  H. M., Etsion,  I., and Bogy,  D. B., 1990, “Adhesion of Contacting Rough Surfaces in the Presence of Sub-Boundary Lubrication,” ASME J. Tribol., 112, pp. 98–104.
McCool,  J. T., 1987, “Relating Profile Instrument Measurements of the Functional Performance of Rough Surfaces,” ASME J. Tribol., 109, pp. 264–270.
Bhattacharya,  A. K., and Nix,  W. D., 1988, “Analysis of Elastic and Plastic Deformation Associated with Indentation Testing of Thin Films on Substrates,” Int. J. Solids Struct., 24, pp. 1287–1298.
Tian,  H., and Saka,  N., 1991, “Finite Element Analysis of an Elastic-Plastic Two Layer Half-Space: Normal Contact,” Wear, 148, pp. 47–68.
Chang,  W. R., Etsion,  E., and Bogy,  D. B., 1988, “Adhesion Model for Metallic Rough Surfaces,” ASME J. Tribol., 110, pp. 50–56.
Hamilton,  G. M., 1983, “Explicit Equations for the Stresses Beneath a Sliding Spherical Contact,” Proc. Inst. Mech. Eng., Part C, 197c, pp. 53–59.
Rabinowicz,  E., 1971, “The Determination of the Compatibility of Metals Through Static Friction Tests,” ASLE Trans., 14, pp. 198–205.
Lozunskli, M. G., 1961, High Temperature Metallography, Pergamon, New York.
Tabor, D., 1951, The Hardness of Metals, Oxford University Press.
Abbott,  E. J., and Firestone,  F. A., 1933, “Specifying Surface Quantity—A Method Based on Accurate Measurement and Comparison,” Mech. Eng. (Am. Soc. Mech. Eng.), 55, pp. 569–572.
Nolle,  H., and Richardson,  R. S. H., 1974, “Static Friction Coefficients for Mechanical and Structural Joints,” Wear, 28, pp. 1–13.
Paslay,  P. R., and Plunkett,  R., 1953, “Design of Shrink-Fits,” Trans. ASME, 75, pp. 1199–1202.
Buckley,  D., 1977, “The Metal-to-Metal Interface and Its Effect on Adhesion and Friction,” J. Colloid Interface Sci., 58, pp. 36–53.
Bay,  N., and Wanheim,  T., 1976, “Real Area of Contact and Friction Stress at High Pressure Sliding Contact,” Wear, 38, pp. 201–209.
Broniec,  Z., and Lenkeiwicz,  W., 1980, “Static Friction Processes Under Dynamic Loads and Vibration,” Wear, 80, pp. 261–271.
Rabinowicz,  E., 1967, “Variation of Friction and Wear of Solid Lubricant Films With Film Thickness,” ASLE Trans., 10, pp. 1–9.
Tsuya,  Y., and Takagi,  R., 1964, “Lubricating Properties of Lead Films on Copper,” Wear, 7, pp. 131–143.

Figures

Grahic Jump Location
Friction coefficient versus dimensionless separation
Grahic Jump Location
The geometry of contacting rough surfaces with a thin film
Grahic Jump Location
The geometry of an asperity contact
Grahic Jump Location
Failure location for asperity versus Poisson’s ratio
Grahic Jump Location
Dimensionless contact area versus dimensionless mean separation with ψ=0.5
Grahic Jump Location
Dimensionless contact load versus dimensionless mean separation with ψ=0.5
Grahic Jump Location
Static friction coefficient versus dimensionless external force
Grahic Jump Location
Static friction coefficient versus dimensionless external force
Grahic Jump Location
Static friction coefficient versus dimensionless external force
Grahic Jump Location
Static friction coefficient versus dimensionless external force
Grahic Jump Location
Static friction coefficient versus dimensionless external force
Grahic Jump Location
Static friction coefficient versus film thickness

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In