Effect of Thermal Property Variation on Surface Grooving

[+] Author and Article Information
Kia-Moh Teo, Khalid Lafdi

NSF-State-Industry, Center for Advanced Friction Studies, Southern Illinois University at Carbondale, Carbondale, IL 62901

J. Tribol 124(2), 274-280 (Apr 17, 2000) (7 pages) doi:10.1115/1.1398550 History: Revised April 17, 2000; Received August 17, 2001
Copyright © 2002 by ASME
Your Session has timed out. Please sign back in to continue.


Savage, G., 1993, Carbon-Carbon Composites, Chapman & Hall, London, pp. 323–346.
Razzaque,  M. M., and Kato,  T., 1999, “Effects of a Groove on the Behavior of a Squeeze Film Between a Grooved and a Plain Rotating Annular Disk,” ASME J. Tribol., 121, pp. 808.
Blanco,  C., Bermejo,  J., Marsh,  H., and Menendez,  R., 1997, “Chemical and Physical Properties of Carbon as Related to Brake Performance,” Wear, 213, pp. 1–12.
Akturk,  N., 1999, “The Effect of Waviness on Vibrations Associated with Ball Bearing,” ASME J. Tribol., 121, No. 4, pp. 667.
Bergman, F., Eriksson, M., and Jacobson, S., 1999, “Influence of Disc Topography on Generation of Brake Squeal,” Wear, pp. 621–628.
Lafdi, K., Chen, T., and Chong, W., Carbon, submitted.
Ai,  X., 1998, “Effect of Three-Dimensional Random Surface Roughness on Fatigue Life of a Lubricated Contact,” ASME J. Tribol., 120, pp. 159.
Gao,  C., and Jiaa,  C., 1999, “Friction Mechanism and Lubricant Coverage Study Using Laser Bumps as Model Asperities,” IEEE Trans. Magn., 35, pp. 2445–2447.
Obara,  S., and Kato,  T., 1995, “Effect of Thermal Distortion on Wear of Composites,” ASME J. Tribol., 117, pp. 622.
Cirino,  M., Friedrich,  K., and Pipes,  R. B., 1988, “The Effect of Fiber Orientation on the Abrasive Wear Behavior of Polymer Composite Materials,” Wear, 121, pp. 127.
Simm,  W., and Freti,  S., 1989, “Abrasive Wear of Multiphase Materials,” Wear, 129, pp. 105.
Chen, J. D., Chern, J. H., and Ju, C. P., 1996, “Effect of Load on Tribological Behavior of Carbon-Carbon Composites,” Journal of Materials Science, 31 , pp. 1221–1229.
Chen, J. D., and Ju, C. P., 1994, “Friction and Wear of PAN/pitch-, PAN/CVI-, and pitch/resin/CVI-Based Carbon/Carbon Composites,” Wear, pp. 129–135.
Garrison,  W. M., 1982, “Khruschov’s Rule and the Abrasive Wear Resistance of Multiphase Solids,” Wear, 82, pp. 213–220.
Pan,  T. C., and Hocheng,  H., 1998, “Prediction of Extent of Heat Affected Zone in Laser Grooving of Unidirectional Fiber-Reinforced Plastics,” J. Eng. Mater. Technol., 120, pp. 321.
Teo, K. M., and Lafdi, K., 2001, “Thermal Diffusivity Mapping of Friction Surface Using Photo-Thermal Technique,” ASME J. Tribol., in press.
Giannakopoulos,  A. E., Nilsson,  K. F., and Tsamasphyros,  G., 1995, “The Contact Problem at Delamination,” ASME J. Appl. Mech., 62, pp. 989–996.
Yong,  Z., and Kovacevic,  J., 1997, “Simulation of Chaotic Particle Motion in Particle-Laden Jet Flow and Application to Abrasive Waterjet Machining,” ASME J. Fluids Eng., 119, pp. 435.
Nikas,  G. K., Loannides,  E., and Sayles,  R. S., 1999, “Thermal Modeling and Effects From Debris Particles in Sliding/Rolling EHD Line Contacts—A Possible Local Scuffing Mode,” ASME J. Tribol., 121, pp. 272.
Despres,  J. F., Daguerre,  D., and Lafdi,  K., 1995, “Flexibility of Graphene Layers in Carbon Nanotubes,” Carbon, 33, pp. 87–92.
Falvo,  M. R., Clary,  G. J., Taylor,  R. M., Chi,  V., Brooks,  F. P., Washburn,  S., and Superfine,  R., 1997, “Bending and Buckling of Carbon Nanotubes Under Large Strain,” Nature, 389, pp. 582–584.


Grahic Jump Location
Friction Assessment Screening Test (FAST) machine
Grahic Jump Location
The thermal expansion of each material as a function of temperature
Grahic Jump Location
Schematic of two different sandwiched samples made up of different thermal diffusivity materials
Grahic Jump Location
Thermal diffusivity mapping result of a layer-structured sample made up of the low and high diffusivity materials over a scanning area of 1.0 cm×0.5 cm×0.5 mm resolution 18
Grahic Jump Location
Surface profilometry of a layer-structured sample before friction test
Grahic Jump Location
Surface images of the sandwiched samples: (a) layer-structure: material A and material C; (b) layer-structure: material A and material B; and (c) woven-structure: material B and material C
Grahic Jump Location
Surface profile of the rotor disk after it was rubbed against a layered sample, which is made up of material A and B
Grahic Jump Location
Surface profile of the rotor disk after it was rubbed against a layered sample, which is made up of material A and C
Grahic Jump Location
Temperature profiles, recorded 2 mm from the friction surface, of the middle layers. The thermocouples were located at the center of the middle layers.
Grahic Jump Location
Surface matching of the layered sample (stator) and the rotor disk
Grahic Jump Location
Bright field image of the friction debris using TEM
Grahic Jump Location
TEM image of the black spot (tubular structures of the friction film). Thick and open graphene tubes (middle right inset is a model of a graphene sheet that can be easily folded at certain angles).
Grahic Jump Location
Surface topography of the rotor disk after it was rubbed against a layered sample. The layers were oriented perpendicular to the rubbing direction.
Grahic Jump Location
Surface topography of the rotor disk after it was rubbed against a woven-structured sample
Grahic Jump Location
High magnification TEM image of the friction film on the disk that was subjected to layer-structured sample with the sliding direction perpendicular to the layer
Grahic Jump Location
An experiment using a laser beam to provide the temperature variation and thermal diffusivity variation across the surface
Grahic Jump Location
Low magnification images of friction surfaces (a) image of the rotor disk; (b) images of 1.27×1.27 cm sample
Grahic Jump Location
Rotor’s surface topography, which was taken across the slit using stylus profilometer



Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In