0
TECHNICAL PAPERS

Some Studies on Scuffing Performance of Surface Treated AISI 4340 Steels

[+] Author and Article Information
M. Ramprasad, M. M. Mayuram

Department of Mechanical Engineering, Indian Institute of Technology, Madras, Chennai 600036 (India)

J. Tribol 125(1), 181-186 (Dec 31, 2002) (6 pages) doi:10.1115/1.1504089 History: Received January 20, 2002; Revised July 01, 2002; Online December 31, 2002
Copyright © 2003 by ASME
Your Session has timed out. Please sign back in to continue.

References

Lee,  S. C., and Chen,  H., 1995, “Experimental Validation of Critical Temperature-Pressure Theory of Scuffing,” Tribol. Trans., 38, pp. 738–742.
Jinno,  O., Tyagi,  M. R., and Kimura,  Y., 1996, “Influence of Surface Roughness on Friction and Scuffing Behavior of Cast Iron Under Sparse Lubrications,” Tribol. Int., 29, pp. 129–136.
Obata,  F., Takehira,  A., Matsuo,  K., and Saeki,  S., 1993, “Effects of Oil Viscosity on Seizure,” JSME International J. Series C , 36(4), pp. 523–529.
Jaramillo,  E. F. E., 1996, “The Additive Ep-Condition and the Critical Scuffing Limit for Rolling-sliding,” ASME J. Tribol., 118, pp. 125–130.
Bell,  J. C., and Willemse,  P. J., 1998, “Mid-Life Scuffing Failure in Automotive Cam-Follower Contacts,” Proc. I. Mech. Engrs, 212, pp. 259–269.
Kim,  K., and Ludema,  K. C., 1995, “A Correlation Between Low Cycle Fatigue Properties and Scuffing Properties of 4340 Steel,” ASME J. Tribol., 117, pp. 617–620.
Matveevsky,  R. M., 1992, “Friction Power as a Criterion of Seizure with Sliding Lubricated Contact,” Wear, 155, pp. 1–5.
Yang,  J., Cowan,  R. S., and Winer,  W. O., 1993, “Prediction of Failure Transitions in Sliding Contacts by a Thermomechanical Wear Model,” ASME J. Tribol., 115, pp. 432–438.
Horng,  J. H., 1998, “True Friction Power Intensity and Scuffing in Sliding Contacts,” ASME J. Tribol., 120, pp. 829–834.
Kwasniak,  E., Pasierski,  J., and Stupnicki,  J., 1997, “Some Remarks Concerning Scuffing of Ceramics Slid Against Stell,” Wear, 209, pp. 219–228.
Vick,  B., Furey,  M., and Iskandar,  K., 2000, “Theoretical Surface Temperatures Generated From Sliding Contact of Pure Metallic Elements,” Tribol. Int., 33, pp. 265–271.
Meng,  V. V., 1960, “The Investigation of Steel Seizure With Disc Machine,” Friction and Wear of Machines, 14 , pp. 222–237.
Dyson,  A., 1975, “Scuffing-A Review, Part 1 and Part 2,” Tribol. Int., 8, pp. 77–87, 117–122.
Bond-Yen,  T., and Winer,  W. O., 1989, “Friction-Induced Thermal Influences in Elastic Contact Between Spherical Asperities,” ASME J. Tribol., 111, pp. 315–322.
Durkee,  D. B., and Cheng,  H. S., 1980, “An Examination of a Possible Mode of Scuffing Failure in Simple Sliding,” Wear, 59, pp. 223–230.

Figures

Grahic Jump Location
Scuffing load variation with sliding velocity for the different treatments
Grahic Jump Location
Comparison of friction power variation with sliding velocity for the different treatments
Grahic Jump Location
Scuffing performance of sursulf treated surface-variation of (a) R.M.S. surface roughness, (b) wear scar diameter, (c) bulk temperature, and (d) Co-efficient of friction. With load under varying sliding velocities.
Grahic Jump Location
Comparison of critical friction power intensity variation with sliding velocity for the different treatments
Grahic Jump Location
Micro-hardness variation with the depth below the surface before and after the scuffing test: (a) hardened specimen; (b) Sursulf treated specimen; and (c) Arcor treated specimen.
Grahic Jump Location
Micro contact wear map of AISI 4340 steels from thermo-mechanical wear model
Grahic Jump Location
Micro and macro contact wear map of AISI 4340 steels from thermo-mechanical wear model
Grahic Jump Location
Wear map comparison of surface treated AISI 4340 steel with experimental scuffing performance data

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In