0
Research Papers: Friction and Wear

Recursive Characteristics of a Running-in Attractor in a Ring-on-Disk Tribosystem

[+] Author and Article Information
Cong Ding

School of Mechatronic Engineering,
China University of Mining and Technology,
Xuzhou 221116, China
e-mail: dingcong@cumt.edu.cn

Hua Zhu

School of Mechatronic Engineering,
China University of Mining and Technology,
Xuzhou 221116, China
e-mail: zhuhua83591917@163.com

Yu Jiang

School of Mechatronic Engineering,
China University of Mining and Technology,
Xuzhou 221116, China
e-mail: Jiangyu@cumt.edu.cn

Guodong Sun

School of Mechatronic Engineering,
China University of Mining and Technology,
Xuzhou 221116, China
e-mail: guodongsun@cumt.edu.cn

Chunling Wei

School of Mechatronic Engineering,
China University of Mining and Technology,
Xuzhou 221116, China
e-mail: clweilove@126.com

1Corresponding author.

Contributed by the Tribology Division of ASME for publication in the JOURNAL OF TRIBOLOGY. Manuscript received February 22, 2018; final manuscript received July 21, 2018; published online August 24, 2018. Assoc. Editor: Daejong Kim.

J. Tribol 141(1), 011604 (Aug 24, 2018) (10 pages) Paper No: TRIB-18-1087; doi: 10.1115/1.4041018 History: Received February 22, 2018; Revised July 21, 2018

To explore the recursive characteristics of a running-in attractor, recurrence plot (RP) and recursive parameters are used to investigate the dynamic features of the structure. The running-in attractor is constructed based on friction noise signals generated from the ring-on-disk wear experiments. The RPs of the running-in attractor are then reproduced in a two-dimensional space. Recursive parameters, recurrence rate (RR), entropy (ENTR), and trend of recurrence (RT) are calculated. Results show that the RP evolves from a disrupted pattern to a homogeneous pattern and then returns to a disrupted pattern in the entire wear process, corresponding to the “formation–stabilization–disappearance” stage of the running-in attractor. The RR and ENTR of the running-in attractor sharply increase at first, remain steady, and then sharply decrease. Moreover, the inclination of RT in the normal wear process is smaller than those in the other two processes. This observation reveals that the running-in attractor exhibits high stability and complexity. This finding may contribute to the running-in state identification, process prediction, and control.

FIGURES IN THIS ARTICLE
<>
Copyright © 2019 by ASME
Your Session has timed out. Please sign back in to continue.

References

Urbakh, M. , Klafter, J. , Gourdon, D. , and Israelachvili, J. , 2004, “ The Nonlinear Nature of Friction,” Nature, 430(6999), pp. 525–528. [CrossRef] [PubMed]
Zhu, H. , and Ge, S. R. , 2004, “ Chaotic Characteristics of Tribological Systems,” Chinese J. Mech. Eng., 40(12), pp. 10–13. [CrossRef]
Sun, D. , Li, G. , Wei, H. , and Liao, H. , 2015, “ Experimental Study on the Chaotic Attractor Evolvement of the Friction Vibration in a Running-in Process,” Tribol. Int., 88, pp. 290–297. [CrossRef]
Liu, T. , Li, G. , Wei, H. , and Sun, D. , 2016, “ Experimental Observation of Cross Correlation Between Tangential Friction Vibration and Normal Friction Vibration in a Running-in Process,” Tribol. Int., 97, pp. 77–88. [CrossRef]
Xia, X. T. , Lv, T. M. , and Meng, F. N. , 2010, “ Chaotic Characteristic and Nonlinear Dynamic Performance of Rolling Bearing Friction Torque,” Appl. Mech. Mater., 26–28(1–2), pp. 88–92. [CrossRef]
Zhou, Y. K. , Zhu, H. , Zuo, X. , and Yang, J. , 2014, “ Chaotic Characteristics of Measured Temperature During Sliding Friction,” Wear, 317(1–2), pp. 17–25. [CrossRef]
Ding, C. , Zhu, H. , Sun, G. D. , Zhou, Y. K. , and Zuo, X. , 2017, “ Chaotic Characteristics and Attractor Evolution of Friction Noise During Friction Process,” Friction, 6(1), pp. 1–15.
Zhu, H. , Ge, S. R. , Li, G. , and Lv, L. , 2007, “ Test of Running-in Process and Preliminary Analysis of Running-in Attractors,” Lubr. Eng., 32(1), pp. 1–3.
Ge, S. R. , and Zhu, H. , 2008, “ Evolvement Rule of Running-in Attractor,” Chinese J. Mech. Eng., 44(3), pp. 99–104. [CrossRef]
Eckmann, J. P. , Kanphorst, O. S. , and Ruelle, D. , 1987, “ Recurrence Plots of Dynamical Systems,” Europhys. Lett., 4(9), pp. 973–977. [CrossRef]
Zbilut, J. P. , and, Webber , C. L., Jr , 1992, “ Embeddings and Delays as Derived From Quantification of Recurrence Plots,” Phys. Lett. A., 171(3–4), pp. 199–203. [CrossRef]
Theil, M. , Romano, M. , and Kurths, J. , 2004, “ How Much Information Is Contained in a Recurrence Plot,” Phys. Lett. A, 330(5), pp. 343–349. [CrossRef]
Firooz, S. G. , Almasganj, F. , and Shekofteh, Y. , 2016, “ Improvement of Automatic Speech Recognition Systems Via Nonlinear Dynamical Features Evaluated From the Recurrence Plot of Speech Signals,” Comput. Electr. Eng., 58, pp. 215–226. [CrossRef]
Marwan, N. , Kurths, J. , and Foerster, S. , 2015, “ Analysing Spatially Extended High-Dimensional Dynamics by Recurrence Plots,” Phys. Lett. A, 379(10–11), pp. 894–900. [CrossRef]
Oberst, S. , and Lai, J. C. S. , 2015, “ Nonlinear Transient and Chaotic Interactions in Disc Brake Squeal,” J. Sound. Vib., 342, pp. 272–289. [CrossRef]
Oberst, S. , and Lai, J. C. S. , 2011, “ Chaos in Brake Squeal Noise,” J. Sound. Vib., 330(5), pp. 955–975. [CrossRef]
Elmaian, A. , Gautier, F. , Pezerat, C. , and Duffal, J. M. , 2014, “ How Can Automotive Friction-Induced Noises Be Related to Physical Mechanisms?,” Appl. Acoust., 76, pp. 391–401. [CrossRef]
Kang, J. , 2015, “ The Onset Condition of Friction Noise in Ball Joint Under Concentric Loading,” Appl. Acoust., 89(89), pp. 57–61. [CrossRef]
Huang, N. E. , Shen, Z. , Steven, R. L. , Wu, M. C. , Shih, H. H. , Zheng, Q. , Yen, N. C. , Tung, C. C. , and Liu, H. H. , 1998, “ The Empirical Mode Decomposition and the Hilbert Spectrum for Nonlinear and Non-Stationary Time Series Analysis,” Proc. R. Soc. Lond. A, 454(1971), pp. 903–995. [CrossRef]
Marwan, N. , Romano, M. C. , Theil, M. , and Kurths, J. , 2007, “ Recurrence Plots for the Analysis of Complex Systems,” Phys. Rep, 438(5–6), pp. 237–329. [CrossRef]
Fraser, A. M. , and Swinney, H. L. , 1986, “ Independent Coordinates for Strange Attractors From Mutual Information,” Phys. Rev. A, 33(2), pp. 1134–1140. [CrossRef]
Rosenstein, M. T. , Collins, J. J. , and Deluca, C. J. , 1994, “ Reconstruction Expansion as a Geometry-Based Framework for Choosing Proper Delay Times,” Physica D, 73(1–2), pp. 82–98. [CrossRef]
Kennel, M. B. , Brown, R. , and Abarbanel, H. D. I. , 1992, “ Determining Embedding Dimension for Phase Space Reconstruction Using a Geometrical Reconstruction,” Phys. Rev. A., 45(6), pp. 3403–3411. [CrossRef] [PubMed]
Mindlin, G. M. , and Gilmore, R. , 1992, “ Topological Analysis and Synthesis of Chaotic Time Series,” Physica D, 58(1–4), pp. 229–242. [CrossRef]
Eckmann, J. P. , and Ruelle, D. , 1992, “ Fundamental Limitations of Estimating Dimensions and Lyapunov Exponents in Dynamical Systems,” Physica D, 6(2–3), pp. 185–187. [CrossRef]
Havstad, J. W. , and Ehlers, C. L. , 1989, “ Attractor Dimension of Nonstationary Dynamical Systems From Small Data Sets,” Phys. Rev. A., 39(2), pp. 845–853. [CrossRef]
Yokoya, N. , Yamamoto, K. , and Funakubo, N. , 1989, “ Fractal-Based Analysis and Interpolation of 3D Natural Surfaces and Their Applications to Terrain Modeling,” Comput. Vision Graphics Image Process., 46(3), pp. 284–302. [CrossRef]
Maragos, P. , and Sun, F. K. , 1993, “ Measuring the Fractal Dimension of Signals,” IEEE. Trans. Signal. Proc., 41(1), pp. 108–121. [CrossRef]
Yang, H. Y. , Ye, H. , Wang, G. Z. , and Pan, G. D. , 2008, “ Identification of Scaling Regime in Chaotic Correlation Dimension Calculation,” Third IEEE Conference on Industrial Electronics and Applications, Singapore, June 3–5, pp. 1383–1387.

Figures

Grahic Jump Location
Fig. 3

Photographs of worn specimens: (a) worn ring and (b) worn disk

Grahic Jump Location
Fig. 4

Schematic of principle of RP

Grahic Jump Location
Fig. 5

Typical patterns of RP: (a) disrupted and (b) homogeneous (logistic system)

Grahic Jump Location
Fig. 6

Delaying time τ and embedding dimension m chosen for three tests: (a) delaying time τ and (b) embedding dimension m

Grahic Jump Location
Fig. 7

Recurrence plots based on different ε in different stages of test 1: (a1) ε = σ/8, (a2) ε = σ/4, (a3) ε = σ/2 in the running-in stage and (b1) ε = σ/2, (b2) ε = σ, (b3) ε = 1.5σ in the normal wear stage

Grahic Jump Location
Fig. 8

Evolutions of phase trajectory and RP in test 1: (a1)–(i1) phase trajectories, (a2)–(i2) RPs, (a1), (a2): 0–19 min, (b1), (b2): 38–57 min, (c1), (c2): 76–95 min, (d1), (d2): 95–114 min, (e1), (e2): 209–228 min, (f1), (f2): 323–342 min, (g1), (g2): 437–456 min, (h1), (h2): 475–494 min, and (i1), (i2): 494–516 min

Grahic Jump Location
Fig. 2

Time series of friction noise and coefficient signals: (a) test 1 (P = 1.49 MPa, v = 0.911 m/s), (b) test 2 (P = 1.05 MPa, v = 0.911 m/s), (c) test 3 (P = 1.05 MPa, v = 0.835 m/s), and (d) test 4 (P = 1.05 MPa, v = 0.835 m/s)

Grahic Jump Location
Fig. 1

Schematic of tribometer

Grahic Jump Location
Fig. 9

Fractal features of RP

Grahic Jump Location
Fig. 13

Selection of no-scale interval

Grahic Jump Location
Fig. 14

Recurrence plots of logistics system with different lengths: (a) n = 500 and (b) n = 2000

Grahic Jump Location
Fig. 12

Time series of variation z in Lorenz equation

Grahic Jump Location
Fig. 10

Recurrence rate and ENTR evolutions of running-in attractor: (a) test 1 (P = 1.49 MPa, v = 0.911 m/s), (b) test 2 (P = 1.05 MPa, v = 0.911 m/s), (c) test 3 (P = 1.05 MPa, v = 0.835 m/s), and (d) test 4 (P = 1.05 MPa, v = 0.835 m/s)

Grahic Jump Location
Fig. 11

Trend of recurrence of running-in attractor in the wear stage

Tables

Errata

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In