On the Theory of Thermal Elastohydrodynamic Lubrication at High Slide-Roll Ratios—Line Contact Solution

[+] Author and Article Information
Peiran Yang, Shiyue Qu, Qiuying Chang, Feng Guo

Department of Mechanical Engineering, Qingdao Institute of Architecture and Engineering, Qingdao, 266033, People's Republic of China

J. Tribol 123(1), 36-41 (Sep 14, 2000) (6 pages) doi:10.1115/1.1330738 History: Received March 23, 2000; Revised September 14, 2000
Copyright © 2001 by ASME
Your Session has timed out. Please sign back in to continue.


Cheng,  H. S., 1965, “A Refined Solution to the Thermal-Elastohydrodynamic Lubrication of Rolling and Sliding Cylinders,” ASLE Trans., 8, pp. 397–410.
Dowson,  D., and Whitaker,  A. V., 1965, “A Numerical Procedure for the Solution of the Elastohydrodynamic Problem of Rolling and Sliding Contacts Lubricated by a Newtonian Fluid,” Proc. Inst. Mech. Eng., London, UK, 180, 3B, pp. 57–71.
Chang,  L., 1992, “Traction in Thermal Elastohydrodynamic Lubrication of Rough Surfaces,” ASME J. Tribol., 114, pp. 186–191.
Yang,  P., and Shen,  J., 1996, “On the Theory of Time-Dependent Micro-TEHL for a Non-Newtonian Lubricant in Line Contacts,” Lubr. Sci., 8, pp. 297–312.
Lee,  R. T., and Hsu,  C. H., 1994, “Advanced Multilevel Solution for Thermal Elastohydrodynamic Lubrication of Simple Sliding Line Contacts,” Wear, 171, pp. 227–237.
Hsiao,  H. S., and Hamrock,  B. J., 1992, “A Complete Solution for Thermal-Elastohydrodynamic Lubrication of Line Contacts Using Circular Non-Newtonian Fluid Model,” ASME J. Tribol., 114, pp. 540–552.
Dyson,  A., and Wilson,  A. R., 1968, “Film Thicknesses in Elastohydrodynamic Lubrication at High Slide/Roll Ratios,” Proc. Inst. Mech. Eng., London, UK, 183, 3P, pp. 81–97.
Kaneta,  M., Nishikawa,  H., Kameishi,  K., and Sakai,  T., 1992, “Effects of Elastic Moduli of Contact Surfaces in Elastohydrodynamic Lubrication,” ASME J. Tribol., 114, pp. 75–80.
Kaneta,  M., Nishikawa,  H., Kanada,  T., and Matsuda,  K., 1996, “Abnormal Phenomena Appearing in EHL Contacts,” ASME J. Tribol., 118, pp. 886–892.
Yang,  P., and Wen,  S., 1990, “A Generalized Reynolds Equation for Non-Newtonian Thermal Elastohydrodynamic Lubrication,” ASME J. Tribol., 112, pp. 631–636.
Ma,  M. T., 1998, “Effects of the Non-Newtonian Behavior of Lubricants on the Temperature, Traction, and Film Thickness in an Elliptical EHD Contact Under Heavy Loads,” ASME J. Tribol., 120, pp. 685–694.
Roelands, C. J. A., 1966, “Correlation Aspects of Viscosity-Temperature-Pressure Relationship of Lubricating Oils,” Ph.D. thesis, Delft University of Technology, The Netherlands.
Yang,  P., and Wen,  S., 1992, “The Behavior of Non-Newtonian Thermal EHL Film in Line Contacts at Dynamic Loads,” ASME J. Tribol., 114, pp. 81–85.
Venner, C. H., 1991, “Multilevel Solution of the EHL Line and Point Contact Problems,” Ph.D. thesis, University of Twente, The Netherlands.
Cameron,  A., 1958, “The Viscosity Wedge,” ASLE Trans., 1, pp. 248–253.
Cermak,  J., 1998, “Discussion (Abnormal Phenomena Appearing in EHL Contact),” ASME J. Tribol., 120, pp. 143–144.
Kudish, I. I., 1999, “Analysis of Abnormal Phenomena in EHL Contacts,” in “The Advancing Frontier of Engineering Tribology,” Proceedings of the 1999 STLE/ASME H.S. Cheng Tribology Surveillance, Orlando, Florida, pp. 188–196.
Ehret,  P., Dowson,  D., and Taylor,  M., 1998, “On the Lubricant Transport Conditions in Elastohydrodynamic Conjunctions,” Proc. R. Soc. London, Ser. A, 454, pp. 763–787.
Lord,  J., Jolkin,  A., Larsson,  R., and Marklund,  O., 2000, “A Hybrid Film Thickness Evaluation Scheme Based on Multi-Channel Interferometry and Contact Mechanics,” ASME J. Tribol., 122, pp. 16–22.
Qu,  S., Yang,  P., and Guo,  F., 2000, “Theoretical Investigation on the Dimple Occurrence in the Thermal EHL of Simple Sliding Steel-Glass Circular Contacts,” Tribol. Int., 33, pp. 59–65.
Yang, P., Qu, S., Guo, F., Kawashima, R., Nishikawa, H., and Kaneta, M., 2000, “A Study on Mechanism of Dimple Formation,” Proceedings of JAST Tribology Conference, Tokyo 2000-5, pp. 281–282 (in Japanese).


Grahic Jump Location
Geometry and coordinate systems
Grahic Jump Location
Film profiles at light, moderate and heavy loads. Ua=2.5, Ub=−0.5.
Grahic Jump Location
Variations of Hmin and μ versus W
Grahic Jump Location
Distributions of temperatures on the surfaces of discs and in the middle layer of the film at a moderate load
Grahic Jump Location
Pressures and film thicknesses for fixed W and Ua but various Ub (W=8×10−5, Ua=2.5).
Grahic Jump Location
Distributions of temperatures on the surfaces of discs and in the middle layer of the film with zero-entrainment
Grahic Jump Location
Variations of Hmin,Hcen and μ versus W(Ua=2.5,Ub=−2.5)
Grahic Jump Location
Pressure distributions and film profiles under opposite kinematic conditions (W=6×10−5,G=3510, Ua=9.0, Ub=−1.0 (ξ=2.5))
Grahic Jump Location
Film temperature distributions with the results given in Fig. 8



Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In