A Fast and Effective Method for Transient Thermoelastic Displacement Analyses

[+] Author and Article Information
Shuangbiao Liu, Michael J. Rodgers, Qian Wang, Leon M. Keer

Center for Surface Engineering and Tribology, Northwestern University, Evanston, IL 60208 847-491-5562(fax)

J. Tribol 123(3), 479-485 (Jun 29, 2000) (7 pages) doi:10.1115/1.1308010 History: Received February 10, 2000; Revised June 29, 2000
Copyright © 2001 by ASME
Your Session has timed out. Please sign back in to continue.


Barber,  J. R., 1969, “Thermoelastic Instabilities in the Sliding of Conforming Solids,” Proc. R. Soc. London, Ser. A, 312, pp. 381–394.
Dow,  T. A., and Burton,  R. A., 1972, “Thermoelastic Instabilities in the Absence of Wear,” Wear, 19, pp. 315–328.
Johnson, K. L., 1996, Contact Mechanics, Cambridge University Press.
Lee,  S. C., and Cheng,  H. S., 1991, “Scuffing Theory Modeling and Experimental Correlations,” ASME J. Tribol., 113, pp. 327–334.
Gao,  J. Q., Lee,  S. C., Ai,  X. L., and Nixon,  H., 2000, “An FFT-Based Transient Flash Temperature Model for General 3-D Rough Surface Contacts,” ASME J. Tribol., 122, pp. 519–523.
Tian,  X., and Kennedy,  F. E., 1994, “Maximum and Average Flash Temperatures in Sliding Contacts,” ASME J. Tribol., 116, pp. 167–173.
Barber,  J. R., 1972, “Distortion of the Semi-infinite Solid Due to Transient Surface Heating,” Int. J. Mech. Sci. 14, pp. 377–393.
Barber,  J. R., 1987, “Thermoelastic Distortion of the Half-space,” J. Therm. Stresses, 10, pp. 221–228.
Barber,  J. R., and Wright,  K., 1967, “The Thermal Distortion Due To a Uniform Circular Heat Source on the Surface of a Semi-infinite Solid,” Int. J. Mech. Sci., 9, pp. 811–815.
Ling, F. F., 1973, Surface Mechanics, New York, John Wiley and Sons.
Ju,  F. D., and Huang,  J. H., 1982, “Heat Checking in the Contact Zone of a Bearing Seal (A Two-Dimensional Model of A Single Moving Asperity),” Wear, 79, pp. 107–118.
Yevtushenko,  A. A., and Kovalenko,  Y. V., 1995, “The Interaction of Frictional Heating and Wear at a Transient Sliding Contact,” J. Appl. Math. Mech., 59, No. 3, pp. 459–466.
Yevtushenko,  A. A., and Ivanyk,  E., 1995, “Determination of Heat and Thermal Distortion in Braking Systems,” Wear, 185, pp. 159–165.
Shi,  F., and Wang,  Q., 1998, “A Method of Thermal Influence Functions and Its Applications in Tribological Studies,” STLE Tribol. Trans., 41, No. 3, pp. 350–358.
Shi,  F., and Wang,  Q., 1998, “A Mixed-TEHD Model for Journal Bearing Conformal Contacts, Part I: Model Formulation and Approximation of Heat Transfer Considering Asperity Contacts,” ASME J. Tribol., 120, pp. 198–205.
Khonsari,  M. M., and Wang,  S. H., 1991, “On the Fluid-Solid Interaction in Reference to Thermoelastohydrodynamic Analysis of Journal Bearings,” ASME J. Tribol., 113, pp. 398–404.
Wang,  Q., and Liu,  G., 1999, “A Thermoelastic Asperity Contact Model Considering Steady-State Heat Transfer,” STLE Tribol. Trans., 42, pp. 763–770.
Liu,  G., and Wang,  Q., 2000, “Thermoelastic Asperity Contacts, Frictional Shear, and Paramter Correlations,” ASME J. Tribol., 122, pp. 300–307.
Liu, G., Wang, Q., and Liu, S. B., 2000, “A Three-Dimensional Thermal-Mechanical Asperity Contact Model for Two Nominally Flat Surfaces in Contact,” ASME Paper No. 2000-Trib-44.
Carslaw, H. S., and Jaeger, J. C., 1959, Conduction of Heat in Solids, Oxford University Press, London.
Mindlin, R. D., 1953, “Force at a Point in the Interior of a Semi-Infinite Solid,” Proceedings of the First Midwestern Conference On Solid Mechanics, pp. 55–59.
Seo,  K., and Mura,  T., 1979, “The Elastic Field in a Half Space Due to Ellipsoidal Inclusions with Uniform Dilatational Eigenstrains,” ASME J. Appl. Mech., 46, pp. 568–572.
Sneddon, I. N., 1951, Fourier Transforms, McGraw Hill Book Company, New York.
Gupta,  P. K., and Walowit,  J. A., 1974, “Contact Stresses Between an Elastic Cylinder and a Layered Elastic Solid,” ASME J. Lubr. Technol., 96, No. 2, pp. 250–257.
O’Sullivan,  T. C., and King,  R. B., 1988, “Sliding Contact Stress Field Due to a Spherical Indenter on a Layered Elastic Medium,” ASME J. Tribol., 110, pp. 235–240.
Ju,  Y., and Farris,  T. N., 1996, “Spectral Analysis of Two-Dimensional Contact Problems,” ASME J. Tribol., 118, pp. 320–328.
Nogi,  T., and Kato,  T., 1997, “Influence of a Hard Surface Layer on the Limit of Elastic Contact-Part I: Analysis Using a Real Surface Model,” ASME J. Tribol., 119, pp. 493–500.
Hu,  Y. Z., Barber,  G. C., and Zhu,  D., 1999, “Numerical Analysis for the Elastic Contact of Real Rough Surfaces,” STLE Tribol. Trans., 42, No. 3, pp. 443–452.
Ju,  Y., and Farris,  T. N., 1997, “FFT Thermoelastic Solutions for Moving Heat Sources,” ASME J. Tribol., 119, pp. 156–162.
Polonsky,  I. A., and Keer,  L. M., 2000, “A Fast and Accurate Method for Numerical Analysis of Elastic Layered Contacts,” ASME J. Tribol., 122, pp. 30–35.
Polonsky,  I. A., and Keer,  L. M., 2000, “Fast Methods for Solving Rough Contact Problems: A Comparative Study,” ASME J. Tribol., 122, pp. 36–41.
Liu,  S. B., Wang,  Q., and Liu,  G., 2000, “A Versatile Method of Discrete Convolution and FFT (DC-FFT) for Contact Analyses,” Wear, 243, No. 1–2, pp. 101–110.
Campbell, G. A., and Foster, R. M., 1931, Fourier Integrals for Practical Applications, Bell Telephone Laboratories, New York.
Timoshenko, S., and Goodier, J. N., 1970, Theory of Elasticity, McGraw-Hill, New York.
Gradshteyn, I. S., and Ryzhik, I. M., 1994, Table of Integrals, Series, and Products, 5th ed, Academic Press, Boston.
Sneddon, I. N., 1972, The Use of Integral Transforms, McGraw-Hill Book Company, New York.


Grahic Jump Location
Description of the physical domain and coordinates
Grahic Jump Location
Example 1: Comparison between Barber’s series solution and the result obtained by using the current method for the thermoelastic deformation caused by a unit point transient-continuous heat source
Grahic Jump Location
Example 2: solution for the thermoelastic deformation caused by a transient heat source q=δ(x1)δ(x2),κt∊[0,0.5]
Grahic Jump Location
Example 3: solution for the thermoelastic deformation caused by a transient heat source q={01otherwise−2≤x1≤2;−2≤x2≤2;0≤κt≤0.5



Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In