Residual stress distribution has been determined in spot welds, which are generally used to join mild steel sheets. Various spot weld configurations were investigated using the full-field, experimental, optical technique of high sensitivity moire´ interferometry. These stresses were found to be in the range 250–300 MPa (tensile) in the center and decreased to 40–100 MPa (tensile) at the edge of the weld nugget. Low cycle fatigue loading of the spot weld caused the residual stress to drop in the weld center by about 30 percent and increase at the edges by as much as 100 percent.
Residual Stress Measurement in Spot Welds and the Effect of Fatigue Loading on Redistribution of Stresses Using High Sensitivity Moire´ Interferometry
Contributed by the Materials Division for publication in the JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY. Manuscript received by the Materials Division February 22, 1999; revised manuscript received January 21, 2000. Associate Technical Editor: S. Datta.
- Views Icon Views
- Share Icon Share
- Search Site
Khanna, S. K., He, C., and Agrawal, H. N. (January 21, 2000). "Residual Stress Measurement in Spot Welds and the Effect of Fatigue Loading on Redistribution of Stresses Using High Sensitivity Moire´ Interferometry ." ASME. J. Eng. Mater. Technol. January 2001; 123(1): 132–138. https://doi.org/10.1115/1.1286218
Download citation file: