Pastewka and Robbins (2014, “Contact Between Rough Surfaces and a Criterion for Macroscopic Adhesion,” Proc. Natl. Acad. Sci., 111(9), pp. 3298–3303) recently have proposed a criterion to distinguish when two surfaces will stick together or not and suggested that it shows quantitative and qualitative large conflicts with asperity theories. However, a comparison with asperity theories is not really attempted, except in pull-off data which show finite pull-off values in cases where both their own criterion and an asperity based one seem to suggest nonstickiness, and the results are in these respects inconclusive. Here, we find that their criterion corresponds very closely to an asperity model one (provided we use their very simplified form of the Derjaguin–Muller–Toporov (DMT) adhesion regime which introduces a dependence on the range of attractive forces) when bandwidth α is small, but otherwise involves a root-mean-square (RMS) amplitude of roughness reduced by a factor . Therefore, it implies that the stickiness of any rough surface is the same as that of the surface where practically all the wavelength components of roughness are removed except the very fine ones.
Skip Nav Destination
Article navigation
Research-Article
On Pastewka and Robbins' Criterion for Macroscopic Adhesion of Rough Surfaces
M. Ciavarella
M. Ciavarella
Department of Mechanics,
Management and Mathematics (DMMM),
Politecnico di BARI,
V.le Gentile 182,
Bari 70125, Italy
e-mail: mciava@poliba.it
Management and Mathematics (DMMM),
Politecnico di BARI,
V.le Gentile 182,
Bari 70125, Italy
e-mail: mciava@poliba.it
Search for other works by this author on:
M. Ciavarella
Department of Mechanics,
Management and Mathematics (DMMM),
Politecnico di BARI,
V.le Gentile 182,
Bari 70125, Italy
e-mail: mciava@poliba.it
Management and Mathematics (DMMM),
Politecnico di BARI,
V.le Gentile 182,
Bari 70125, Italy
e-mail: mciava@poliba.it
Contributed by the Tribology Division of ASME for publication in the JOURNAL OF TRIBOLOGY. Manuscript received February 15, 2016; final manuscript received July 18, 2016; published online November 30, 2016. Assoc. Editor: James R. Barber.
J. Tribol. May 2017, 139(3): 031404 (5 pages)
Published Online: November 30, 2016
Article history
Received:
February 15, 2016
Revised:
July 18, 2016
Citation
Ciavarella, M. (November 30, 2016). "On Pastewka and Robbins' Criterion for Macroscopic Adhesion of Rough Surfaces." ASME. J. Tribol. May 2017; 139(3): 031404. https://doi.org/10.1115/1.4034530
Download citation file:
Get Email Alerts
Related Articles
Numerical Method of Analyzing Contact Mechanics between a Sphere and a Flat Considering Lennard-Jones Surface Forces of Contacting Asperities and Noncontacting Rough Surfaces
J. Tribol (January,2012)
Analysis of Microwaviness-Excited Vibrations of a Flying Head Slider in Proximity and Asperity Contact Regimes
J. Tribol (November,2017)
The Influence of Adhesion and Sub-Newton Pull-Off Forces on the Release of Objects in Outer Space
J. Tribol (October,2006)
Related Proceedings Papers
Related Chapters
Thermal Interface Resistance
Thermal Management of Microelectronic Equipment
Surface Analysis and Tools
Tribology of Mechanical Systems: A Guide to Present and Future Technologies
Elastic Constant Used in Continuum-Based Adhesion Models
International Symposium on Information Engineering and Electronic Commerce, 3rd (IEEC 2011)